APC Back-UPS Pro 1500VA, AVR, 230V, CIS
-
High Performance Computer and Electronics UPS for Premium Power Protection
-
Includes: CD with software, Qty 1- Detachable IEC Power Cord, Telephone Cable, USB cable, User Manual, Warranty card
Overview
BR1500G-RS Features
APC Back-UPS Pro 1500VA, AVR, 230V, CIS
-
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
-
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
-
Audible alarms
Provides notification of changing utility power and UPS power conditions
-
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
-
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
-
Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
-
Cold-start capable
Provides temporary battery power when the utility power is out.
-
Data-line Protection
Protection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.
-
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
-
Disconnected battery notification
Warns when a battery is not available to provide backup power.
-
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
-
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
-
LCD display
Alpha-Numeric Display which displays system parameters and alarms.
-
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
-
Power-saving outlets
Automatically cuts power to idle equipment to conserve electricity.
-
Replace Battery LED
An external Replace Battery LED informs the end-user that the battery needs to be replaced.
-
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
-
Serial connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC’s Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
-
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Back-UPS ProFeatures & Benefits
Manageability
-
Disconnected battery notification
Warns when a battery is not available to provide backup power.
-
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
-
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
-
Audible alarms
Provides notification of changing utility power and UPS power conditions
Availability
-
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
-
Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
-
Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
-
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
-
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
-
Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
-
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
-
Cold-start capable
Provides temporary battery power when the utility power is out.
-
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Serviceability
-
Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
-
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Protection
-
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
-
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
-
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Marketing Features
-
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
-
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
-
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
-
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
-
Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
Detailed Tech Specification
Output
-
Output power capacity
865Watts / 1.5 kVA
-
Max Configurable Power (Watts)
865Watts / 1.5 kVA
-
Nominal Output Voltage
230V
-
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
-
Output Frequency (not synced)
50/60 Hz +/-1 Hz
-
Topology
Line Interactive
-
Waveform type
Stepped approximation to a sinewave
-
Output Connections
(3) Schuko CEE 7 (selector_surgetitle)
(3) Schuko CEE 7 (Battery Backup)
-
Transfer Time
10ms typical : 12ms maximum
Input
Batteries & Runtime
No reviews yet.
Enquire
