The GPZ-IPLE daughter boards are used for converting the RTP (Real Time Transfer Protocol) packets via the IP network and PCM highway. The daughter board is installed on the GCD-CP10. The IP telephones are connected directly to the IP bus. When IP telephones need to be connected to a conventional PCM-based digital circuit, this board converts the IP packet signal into a PCM signal format and connects to the PCM time division switch. The GPZ-IPLE daughter board is required for IP telephones to communicate with non-VoIP UNIVERGE SV9100 telephones, and place or receive outside calls. The VoIP daughter board provides the voice (RTP/RTCP) processing function. The call control function is mounted on the CPU.  FEATURES

• The SV9100 CPU Main Processor Blade (GCD-CP10) utilizes 32-bit microprocessor with DSP technology.
• Controls all system functions & operations.
• Provides system resources for DTMF Receivers, Caller ID, MF senders & receivers.
• It must be installed in the first universal slot of the base chassis.
• It must be equipped with either an SD-A1 (SV9100S) or SD-B1 (SV9100E) Card.
• 256 (GPZ-IPLE) CHANNELS
• PROVIDES 16 VOIP CHANNELS
• EQUIPPED WITH 8-CONDUCTOR JACK AND FERRITE CORE - REQUIRED FOR IP TELEPHONES & IP TRUNKS
• CAN BE EXPANDED TO (32) VOIP CHANNELS WITH THE 16-CHANNEL VOIP RESOURCE LICENSE (1100082)
• Works With The Following Systems: UNIVERGE 9000 SYSTEMS